pipette
ENEnglish

Joule-heated regenerable carbon dioxide capture filter for demand-controlled ventilation in indoor applications

Minjae Kim, Joo Young Shin, Jungwoo Huh, Gil Jung, Seonggon Kim, Bryan S Kim, Jae Won Lee, Hoon Wee, Youngdeog Koh, Sam Sukgoo Yoon, Yong Tae Kang

Revista con revisión por paresUso en el mundo real

En palabras de los autores

Carbon dioxide (CO2) plays a key role in indoor air quality and is traditionally managed through ventilation, which often increases energy consumption. This work proposes a demand-controlled ventilation system integrated with a CO2 filter to reduce both indoor CO2 levels and ventilation-related energy use. The modular CO2 capture filter was manufactured by spray-coating an amine-functionalized solid sorbent onto a carbon fiber substrate, enabling rapid thermal regeneration via Joule heating within 15 min at 100 °C. System-scale operation was optimized using Differential Evolution, and a deep neural network was employed as a surrogate model to rapidly approximate the optimized control parameters across varying indoor conditions. Simulation-based analysis indicates the proposed system could lower energy loads by about 14.9–25% compared to conventional systems, while maintaining indoor CO2 at 600 ppm under various outdoor conditions. This work establishes an implementation pathway spanning material characterization, lab-scale tests, and model-based system-level analysis. The study develops a carbon fiber carbon dioxide filter coated with amine-functionalized silica and regenerates it by electrical Joule heating (95% desorption in 15 minutes at 100 degrees Celsius). Simulations optimize control and estimate 14.9–25% ventilation energy savings.

Resultado principalEl resumen no menciona limitaciones.

Apareció: lunes, 5 de octubre. Nature Communications. Revista con revisión por pares.

DOI: 10.1038/s41467-026-78257-7