pipette
ENEnglish

Low contact resistance and high current density in ballistic p-type transistors based on oxygen-doped WSe2 monolayers

Lei Sun, Tingting Gao, Lin Xu, Wanying Li, Chuanqi Zhang, Zhengyu Zhang, Kian Ping Loh, Yuhui He, Kaustav Banerjee, Yang Chai, Lain‐Jong Li, Xiangshui Miao, Xuefei Li

Revista con revisión por paresUso en el mundo real

En palabras de los autores

Abstract The development of high-performance p-type monolayer transistors is critical for extending two-dimensional (2D) semiconductors beyond silicon in sub 1-nm technology nodes for complementary metal–oxide–semiconductor (CMOS) circuits. However, insufficient doping and metal-induced gap states (MIGS) during metal deposition lead to high contact resistance, greatly limiting p-type on-state currents. Here, we demonstrate high-performance ballistic p-type monolayer tungsten diselenide (WSe 2 ) transistors by oxygen p-doping. The controllable oxygen doping greatly reduces the number of Se vacancy defects in as-grown WSe 2 , and thus increases the hole mobility from 55 to 218.3 cm 2 V −1 s −1 —approaching the theoretical limit. Moreover, this approach also induces a heavily hole-doped contact region in p-type monolayer WSe 2 devices and decreases the contact resistance from 1869 Ω·μm down to 104 Ω·μm. Consequently, a 16-nm-channel WSe 2 p-type field effect transistor (pFET) delivers a saturation current of up to 1635 μA μm −1 at a drain voltage of −1.2 V and a ballistic ratio as high as 81% at room temperature.

Resultado principalEl resumen no menciona limitaciones.

Apareció: sábado, 3 de octubre. Nature Communications. Revista con revisión por pares.

DOI: 10.1038/s41467-026-78157-w