pipette
ENEnglish

Amorphous selenium-alloyed TeOx thin-film solar cells

Zhaoheng Ling, Linqu Luo, Chrysa Aivalioti, Temur Maksudov, Mengxi Zhang, Theodoulos Kalogerakis, Lazaros Panagiotidis, Elefterios Lidorikis, Spyros Doukas, Nikolaos Kalfagiannis, Epameinondas Tziortzios, Leonidas Tsetseris, Huihui Zhu, Ao Liu, Yong-Young Noh, Martin Heeney, Shadi Fatayer, Thomas D. Anthopoulos

PreprintUso en el mundo real

En palabras de los autores

Tellurium dioxide (TeO) is a wide-bandgap oxide with attractive processing versatility and emerging p-type semiconducting behaviour, making it a promising material system for optoelectronic and photovoltaic applications. However, TeO-derived thin films prepared by scalable manufacturing processes, such as vacuum sublimation, can contain residual metallic Te species that introduce trap states, limit hole transport, and promote carrier recombination. Here, we demonstrate a selenium alloying strategy to control the defect chemistry of vacuum-sublimed TeO films. TeO:Se powder mixtures (90:10~wt%) were thermally evaporated and subsequently annealed in air at 225~C for up to 9~h, yielding amorphous TeO:Se films with an optical bandgap of 0.98~eV under optimised conditions. Structural, chemical, optical, and electrical analyses show that prolonged annealing promotes Se redistribution, suppresses residual Te to approximately 0.4%, reduces the film's surface roughness, and shifts the valence-band edge. To evaluate the potential of TeO:Se for photovoltaic applications, we fabricated thin-film solar cells with an ITO/ZnO/TeO:Se/MoO/Ag architecture. Devices based on an 80~nm TeO:Se active layer annealed for 9~h exhibit optimal performance, with broadband photocurrent generation from 300 to 1000~nm, yielding an open-circuit voltage of 0.50~V, a short-circuit current density of 8.50~mA~cm, a fill factor of 0.44, and a maximum power conversion efficiency of approximately 1.87%. These results establish selenium-alloyed TeO as a viable oxide-derived absorber for thin-film photovoltaics and highlight chemical-state control as an effective route for improving photovoltaic performance.

Resultado principalEl resumen no menciona limitaciones.

Apareció: viernes, 30 de octubre. arXiv. Preprint, todavía sin revisión por pares.

Comentario de los autores: n/a