Shear SAW piezoelectricity of single-crystalline films grown on YX- substrates by DLI-CVD
En palabras de los autores
Direct growth of single-crystalline films with technologically relevant nonpolar orientations and a single ferroelectric domain state remains challenging. Here, we demonstrate the epitaxial growth of a 320-nm-thick, single-domain YX-oriented film on a congruent YX-cut substrate by direct liquid injection chemical vapor deposition. The deposition temperature was limited to to preserve the ferroelectric domain state of the substrate. X-ray diffraction confirmed that the film inherited the substrate orientation and domain state and exhibited no detectable secondary phases. The LN rocking-curve full width at half maximum was , approaching the instrumental resolution and demonstrating its high crystalline quality. Single-port leaky surface acoustic wave (LSAW) resonators with a wavelength of were fabricated on the heterostructure and on a bare reference substrate. At approximately 1 GHz, the -based resonators exhibited an electromechanical coupling coefficient of about 13%, compared to 8.5% for the reference -based resonators. These results demonstrate that direct epitaxial growth can produce high-quality, strongly piezoelectric films and provide a route toward thickness-controlled layered substrates for high-performance acoustic devices.
Apareció: martes, 20 de octubre. arXiv. Preprint, todavía sin revisión por pares.
Comentario de los autores: This manuscript has been submitted to Applied Physics Letters. 8 pages, 2 figures