pipette
ENEnglish

MR-MPCC: Model Predictive Contouring Control for Robotic Manipulator Tracking under Moving Reference Frames

Chonghao Cheng, Tiancheng Li, Jonathan Woolfrey, Liang Zhao, Shoudong Huang

PreprintUso en el mundo real

En palabras de los autores

Maintaining small path-tracking errors under moving reference frames is essential for robotic manipulation tasks with tight execution tolerances, such as machining and surgical automation. Conventional time-indexed controllers, including tracking Model Predictive Control (MPC), rely on a fixed temporal correspondence with the reference trajectory and may therefore accumulate path-relative error under abrupt reference-frame motion or timing mismatch. This paper presents MR-MPCC, a Model Predictive Contouring Control (MPCC) framework for velocity-controlled robotic manipulators with 6-DoF end-effector pose regulation under Moving-Reference disturbances. A hierarchical control architecture is adopted, in which an upper-level MPCC optimizes path progress while penalizing contouring and orientation errors, and a constrained resolved motion rate control (RMRC) layer maps the commanded Cartesian twist to feasible joint velocities under joint-level and safety constraints. MR-MPCC is implemented in a ROS2--MuJoCo pipeline and validated on a UR5e platform under moving-reference disturbances, where the path frame is perturbed and tracked by electromagnetic sensors. Compared with PI control and time-indexed tracking MPC under matched disturbance, MR-MPCC achieves lower geometric path-following error and smaller deviations in the moving path frame, demonstrating improved path-following performance under reference-frame motion.

Resultado principalEl resumen no menciona limitaciones.

Apareció: viernes, 16 de octubre. arXiv. Preprint, todavía sin revisión por pares.

Comentario de los autores: Accepted by The IEEE/RSJ International Conference on Intelligent Robots and Systems 2026 (IROS 2026)