pipette
ENEnglish

Grain-Size Dependence of Thermal and Electrical Properties in (Cr,Mo,Ta,V,W)C1-{\delta} High-Entropy Carbide Ceramics

Ali Sarikhani, Gregory E. Hilmas, David W. Lipke, Douglas E. Wolfe, Stefano Curtarolo, Shen J. Dillon, William G. Fahrenholtz

Preprint con versión publicada

En palabras de los autores

Thermal and electrical transport in high-entropy carbides can be influenced by grain-boundary scattering, but the relevant microstructural regime remains uncertain. Here, near-fully dense ceramics were densified by spark plasma sintering at 1750-1950 {\deg}C, producing average grain sizes from 9.3 4.9 to 28.8 15.3 m while retaining the rock-salt phase. Heat capacities were measured experimentally and estimated by the Neumann-Kopp law with the latter used to calculate thermal conductivity. Thermal conductivity values were in the range of 6.8-7.1 W at room temperature, but showed no systematic dependence on grain size within the investigated range. Room-temperature electrical resistivity values were in the range of 151.9 to 177.0 cm and likewise showed no grain-size dependence. The electron contribution to room-temperature thermal conductivity was estimated to be approximately 58-68% of total thermal conductivity as estimated using the Wiedemann-Franz law and the theoretical Lorenz number. The results indicated that processing-induced grain coarsening did not produce clearly resolvable transport-property changes under the conditions investigated leading to the conclusion that intrinsic disorder and defect chemistry may exert stronger influences on properties.

Resultado principalLimitación que admiten los autores

Apareció: viernes, 16 de octubre. arXiv. Preprint con versión publicada.

DOI: 10.1111/jace.71312

Versión publicada: J. Am. Ceram. Soc. 109(10), e71312 (2026)