pipette
ENEnglish

Cross-Layer Co-Design of Low-Latency Stateful Logic Adders with Printed Memristors

Fabian Seiler, Kerem Kagan G\"ucl\"u, Hongrong Hu, Gabriel Cadilha Marques, Jasmin Aghassi-Hagmann, Nima TaheriNejad

Preprint

En palabras de los autores

Data movement between memory and processing units remains a major bottleneck in data-centric systems. Memristive Stateful Logic (SL) addresses this problem by performing Boolean operations directly on stored resistive states. However, arithmetic efficiency depends jointly on the device-supported logic primitive set, the dependency structure of the resulting operation sequence, and its mapping to datapath architectures. While prior designs typically optimize device, logic, and architecture layers separately, we jointly consider them to co-design a stateful adder. We experimentally demonstrate a mixed MAGIC and FELIX logic primitive set on printed Electrochemical Metallization (ECM) memristors and derive a full adder sequence optimized for inter-bit carry propagation. Mapping this sequence to bit-serial, bit-parallel, and bit-pipelined datapaths reduces the latter two to 2n+6 cycles for an n-bit addition. For 32-bit addition, this requires 60-88% fewer cycles than prior SL adders. Across four representative workloads, we achieve 3.7x-16.4x speedup over prior. These results show how cross-layer co-design can translate into improved workload-level performance.

Resultado principalEl resumen no menciona limitaciones.

Apareció: jueves, 15 de octubre. arXiv. Preprint, todavía sin revisión por pares.

Comentario de los autores: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible