pipette
ENEnglish

RF-Resolved RIN Engineering of High-Power CW Yb Fiber Laser Architectures Using Seed Topology, Seed Power, Pumping Geometry and Cavity FSR

Anitta Augustine, V. Meher, Shantanu Dambare, and V. Balaswamy

PreprintDice ser un gran avanceUso en el mundo real

En palabras de los autores

We report, to the best of our knowledge, the first controlled, like-for-like experimental mapping of how four practical design parameters--seed-cavity topology, seed power, amplifier pumping geometry, and seed-cavity free spectral range (FSR)--jointly shape the radio-frequency (RF)-resolved relative intensity noise (RIN) of high-power continuous-wave (CW) Yb-doped fiber lasers. We compare a standalone bidirectional fiber Bragg grating (FBG) oscillator, an FBG-seeded master-oscillator power amplifier (MOPA), and unidirectional ring-seeded MOPAs with FSRs of approximately 11.5 and 5 MHz, all near 1064 nm at a common 72 W output, with RIN measured from 10 kHz to 1 GHz. Across all settings, the low-frequency RIN is technical-noise limited and nearly architecture-independent, whereas RIN above 160 kHz is governed by the seed-cavity topology and its transfer through the amplifier. Higher seed power suppresses the mid- and high-frequency RIN, but the seed-alone and amplified-output comparison reveals opposite transfer for the two topologies: for FBG seeding the 2 MHz-1 GHz RMS RIN increases through amplification (3.66 percent to 4.14 percent at 15 W seed), whereas for ring seeding it decreases (1.47 percent to 1.35 percent). Forward pumping gives the best power-scaling/noise trade-off, while reducing the ring FSR from approximately 11.5 to 5 MHz preserves the high-frequency RIN advantage, confirming it is not a mode-spacing effect. At matched conditions, ring seeding lowers the integrated RMS RIN by 2-3 times (160 kHz-2 MHz) and approximately 3 times (2 MHz-1 GHz, approximately 9-10 dB to near -127.4 dBc/Hz). These results yield band-resolved design rules linking each band to its dominant lever. The unidirectional ring-seeded MOPA thus offers a simple, scalable route to broadband pump-RIN suppression for nonlinear and frequency-conversion photonics.

Resultado principalEl resumen no menciona limitaciones.

Apareció: viernes, 9 de octubre. arXiv. Preprint, todavía sin revisión por pares.

Comentario de los autores: Submitted to IEEE/Optica Journal of Lightwave Technology. 12 pages, 8 figures