Designing an Efficient Excavator Bucket for Lunar ISRU: A Comparative Study with Vision-Based Fill and Displacement Analysis
En palabras de los autores
This paper present a spiral-cavity wheel for lunar regolith excavation and a sensor-light evaluation stack that jointly estimates fill ratio (vision), sinkage (vision), and specific energy from actuator logs. In benchtop tests (four revolutions at 5, 10, and 15~RPM) against two literature baselines, the proposed wheel achieved higher excavated mass and fill ratio, delivering 2.2-3.0 times higher excavation rate while reducing specific energy by 29 % relative to a bucket-drum baseline. Normalized sinkage (mm/kg) was also lower, indicating stable traction without bogging. Effort-time traces show a steady torque envelope with repeatable cut-carry-dump cycles across speeds. We provide a retention index that correlates with fill ratio and a DEM setup that reproduces experimental trends with low error. Results suggest spiral-cavity wheels can replace heavier multi-actuator diggers when mass, simplicity, and energy efficiency are mission drivers.
Apareció: miércoles, 23 de septiembre. arXiv. Preprint, todavía sin revisión por pares.
Comentario de los autores: Accepted and presentaed at the 2026 IEEE International Conference on Robotics and Automation (ICRA 2026)