pipette
ESEspañol

Roughness-controlled tribocharging governs friction in dry glass contacts

Liang Peng, Begüm Demirkurt, Thibault Roch, Albert M. Brouwer, Bart Weber, Daniel Bonn

Peer-reviewed journal

In the authors' words

Surface roughness can either increase or decrease friction depending on the dominant mechanism: smoothing reduces friction by suppressing asperity-induced deformation, but can increase friction by enhancing interfacial adhesion. Here, we show that, for dry glass–glass contacts, increasing nanoscale roughness can reduce friction because it suppresses triboelectric adhesion. As the root-mean-square surface slope h’rms of the glass ball is increased from 0.01 to 0.09, the friction coefficient drops by about 30%, despite a threefold increase in the average contact pressure. Using rheometer-based friction measurements in dry nitrogen, super-resolution imaging of the real contact area, soft X-ray discharge, and Faraday-cup electrometry, we show that increasing roughness reduces both the real contact area and retained tribocharge, thereby weakening the electrostatic contribution to friction. Discharging the interface with soft X-rays largely removes the roughness dependence of friction. Our results establish tribocharging as an adhesion mechanism through which nanoscale roughness controls friction in dry dielectric contacts.

Main resultThe abstract does not state a limitation.

Appeared: Thursday, November 19. Physical Review Letters. Peer-reviewed journal.

DOI: 10.1103/9cl1-ztw6