pipette
ESEspañol

Regulating the crystallization of thermally evaporated perovskites for efficient near-infrared light-emitting diodes

Yangyu Liu, Yuhan Zhou, Jianing Chang, Jie Yang, Dongqin Yuan, Weidong Xu, Wang Wang, Zhonghua Li, Xingjiao Feng, Liuchong Fu, Jianpu Wang, Zhaosheng Li, Bingchen He, Tao Yu, Zhigang Zou, Feng Gao, Chunxiong Bao

Peer-reviewed journalReal-world use

In the authors' words

Abstract Thermal evaporation of perovskite films holds considerable promise for the scalable manufacturing and pixel patterning of perovskite light-emitting diodes (PeLEDs). However, the performance of evaporated PeLEDs remains inferior to their solution-processed counterparts due to the lack of effective strategies to regulate perovskite crystallization during vacuum deposition. Here we address this challenge and achieve precise control over crystallization pathways. Dual-amide additives suppress premature perovskite phase formation during deposition and decelerate crystallization kinetics during post-annealing. We realize thermally evaporated near-infrared PeLEDs with a maximum external quantum efficiency of 25.0% for emission at 805 nm, and a T 50 lifetime of 23 h at a driving current density of 100 mA cm −2 . To show the advantages of thermal evaporation in pixelization, we realize monolithic dual-colour-emitting PeLEDs at 805 nm and 759 nm by integrating different PeLEDs on the same substrate and demonstrate dual-wavelength wearable pulse oximetry. This work provides insights into vacuum deposition crystallization dynamics and establishes a crystallization regulation methodology to advance evaporated perovskite optoelectronics.

Main resultThe abstract does not state a limitation.

In plain words AI summary

Thermal evaporation could help make perovskite light-emitting diodes at scale, but evaporated devices perform worse than solution-made ones. The authors used dual-amide additives to slow down crystal formation during deposition and post-annealing. They made near-infrared devices with 25.0% external quantum efficiency at 805 nm and a lifetime of 23 hours at 100 mA cm−2. They also combined two devices on one substrate to make dual-color emitters at 805 nm and 759 nm for wearable pulse oximetry. The work offers understanding of vacuum deposition crystallization and a method to improve evaporated perovskite optoelectronics.

Written by Kimi K2.5 using only the abstract above. Jev checked that every sentence is supported by the abstract sentences it cites, and removed any that were not. Point at a sentence to highlight its source.

Appeared: Sunday, October 25. Nature Photonics. Peer-reviewed journal.

DOI: 10.1038/s41566-026-02036-5