Hydroxyl-mediated oxygen anchoring steers CO electroreduction toward ethanol
In the authors' words
Electrochemical conversion of carbon monoxide (CO) to ethanol is challenged by competing pathways that remove oxygen from reaction intermediates and form ethylene. Here we show that strontium (Sr)-modified copper (Cu) promotes ethanol formation and propose hydroxyl-mediated oxygen anchoring as a mechanism for oxygen-retention. Sr-derived sites are proposed to host hydroxyl adjacent to Cu reaction sites, creating a site-differentiated interface that shift hydroxyl from site-competing spectators to selectivity-directing components. In situ spectroscopy reveals Sr-dependent changes in signals associated with adsorbed CO and oxygen-containing intermediates. Calculations suggest that nearby Sr–OH groups can stabilize the oxygen-ends of selected intermediates through non-covalent interactions, mitigating C–O bond weakening. The resulting Sr(1.0%)-Cu catalyst achieves an ethanol Faradaic efficiency (FE) of 65.4% at 1.0 A cm−2, with an ethanol-to-ethylene FE ratio of ~18.7, compared with a maximum of ~2.0 for pristine Cu. It also operates for over 200 hours in a membrane-electrode assembly and retains ethanol selectivity under syngas feeds. These findings highlight the spatial organization of interfacial hydroxyl species as a strategy for oxygen-retaining electrosynthesis. Converting carbon monoxide into ethanol is hindered by oxygen removing pathways. Here, the authors report a strontium-modified copper catalyst designed to organize surface hydroxyl groups, promoting oxygen retention and ethanol formation at industrially relevant current densities.
In plain words AI summary
Converting carbon monoxide to ethanol is difficult because competing reactions tend to remove oxygen and form ethylene instead. The authors created a copper catalyst modified with strontium that promotes ethanol formation. Strontium-derived sites hold hydroxyl groups near copper reaction sites, which helps keep oxygen in the intermediates. The catalyst achieved 65.4% ethanol efficiency at 1.0 A cm−2, with an ethanol-to-ethylene ratio of about 18.7, far above the ~2.0 for plain copper. It also ran for over 200 hours in a membrane-electrode assembly and kept ethanol selectivity with syngas feeds.
Written by Kimi K2.5 using only the abstract above. Jev checked that every sentence is supported by the abstract sentences it cites, and removed any that were not. Point at a sentence to highlight its source.
Appeared: Thursday, November 19. Nature Communications. Peer-reviewed journal.