pipette
ESEspañol

Facet-dependent anion adsorption for electrolyte-Cu interfacial stability in initially anode-free Li-metal batteries

J. W. LEE, Minju Song, Y.-H. Cho, Chaeyeong Nam, Sejin Kim, Hyeon Jeong Kim, Dongwoo Kim, Jeesoo Park, Hyeokjin Kwon, Rama Krishnan Vasudevan, Sang Woo Han, Hee‐Tak Kim, Seungbum Hong, Nam‐Soon Choi

Peer-reviewed journalReal-world use

In the authors' words

Initially anode-free Li-metal batteries, in which Li-metal is constructed in-situ during charging, enable increased energy density. However, interfacial degradation reactions between the electrolyte and lithiophobic Cu prevent stable solid electrolyte interphase formation on the negative electrode. Here, we elucidate a time-evolving interfacial mechanism in which adsorption of electrolyte components contributes to initial interfacial layer formation and solid electrolyte interphase stability. Most organic solvents adsorb more strongly than Li-salt compounds on Cu through van der Waals dispersion interactions. This preferential adsorption produces a solvent-dominated interfacial layer that undergoes rapid compositional reconstruction during Cu oxide reduction upon initial charging. In contrast, lithium tetrafluoroborate possesses a tetrahedral anion with isotropic charge distribution that binds strongly to the Cu (111)/(100) surfaces and native Cu oxides, producing a tetrafluoroborate-driven interfacial layer that electronically passivates the Cu interface and promotes homogeneous Li nucleation. Consequently, lithium tetrafluoroborate-containing cells achieve 62% capacity retention after 300 cycles at an areal capacity of 4.1 mAh cm−2 and electrolyte conditions of 1.5 g Ah−1 and 4 μL cm−2, establishing a mechanistic basis for adsorption-driven interfacial design in initially anode-free Li-metal batteries. Initially anode-free lithium-metal batteries are limited by unstable interfacial reactions at Cu current collectors. Here, authors show that preferential anion adsorption can stabilize the copper interface and improve long-term cycling.

Main resultThe abstract does not state a limitation.

In plain words AI summary

Initially anode-free lithium-metal batteries build the lithium metal during charging to pack more energy. However, reactions between the electrolyte and copper foil prevent a stable protective layer from forming. The authors found that most organic solvents stick to copper more strongly than lithium salts do. In contrast, lithium tetrafluoroborate binds tightly to copper surfaces and oxides, creating a stable layer that enables even lithium deposition. Cells with this salt kept 62% of their capacity after 300 cycles under practical conditions.

Written by Kimi K2.5 using only the abstract above. Jev checked that every sentence is supported by the abstract sentences it cites, and removed any that were not. Point at a sentence to highlight its source.

Appeared: Tuesday, November 17. Nature Communications. Peer-reviewed journal.

DOI: 10.1038/s41467-026-79429-1