Programmable roll-to-roll laser processing for high value application of low-grade carbon fiber materials
In the authors' words
Abstract Growing production of carbon fibers generates substantial short-chopped fibers that are difficult for high-value use due to their structural discontinuity. Carbon fiber felts offer potential, yet weak inter-fiber bonding and poor conductivity limit the performance. We report a roll‑to‑roll laser processing strategy that uses a liquid precursor to form laser‑induced graphene at fiber‑fiber interfaces, creating conductive pathways and mechanical interconnections. This approach increases tensile strength from 4.1 to 32.2 MPa and electrical conductivity from 1224.0 to 15151.5 S/m. The resulting films demonstrate efficient electrothermal de‑icing and, after copper deposition, lightning strike protection with a damage area of 9657 mm² and depth of 0.4 mm, comparable to aluminum mesh but with 15% lower weight. A custom‑built laser platform enables scalable production. Here, we show the conversion of low‑grade carbon fibers into lightweight, functional films for aerospace applications via scalable laser processing.
Appeared: Tuesday, October 27. Nature Communications. Peer-reviewed journal.