pipette
ESEspañol

Resolving the Kay–Dunn limit and the speed–endurance dilemma in ferroelectric Hf0.5Zr0.5O2 for DRAM-class sub-volt capacitors

Geun Hyeong Park, Sanghyun Jo, Sungwook Park, Yong Hyeon Cho, Hyeong Seok Choi, Hyun Woo Jeong, Se Hyun Kim, Dong Hyun Lee, Moonseek Jeong, Taegyu Kwon, Da Hyun Kim, Ga Yeon Lee, Seunghwa Jeong, Young Yong Kim, Su Yong Lee, Young H. Lee, JoonSuk Park, Chang Hwa Jung, Hanjin Lim, Daewoong Kwon, Ho Jun Kim, Min Hyuk Park

Peer-reviewed journalBold claims, read criticallyReal-world use

In the authors' words

Abstract Ferroelectric hafnium zirconium oxide can increase charge density in scaled capacitors, but its high coercive field limits the low-voltage, high endurance switching required for dynamic random-access memory and embedded ferroelectric memories. Here we show that plasma-engineered (111)-textured TiN electrodes with N-rich, oxidation-resistant surfaces suppress interfacial oxidation and enable robust switching in 5 nm Hf 0.5 Zr 0.5 O 2 capacitors. The devices exhibit saturated hysteresis at 0.6 V, with 2 P r = 31.5 μC cm −2 and E c = 0.62 MV cm −1 , and no hard electrical breakdown through 10 12 bipolar cycles. Their nucleation-limited switching kinetics extrapolate to sub-nanosecond polarisation reversal at DRAM-relevant capacitor areas. At 1.1 V, circuit simulations of a common plate 1T–1 C cell yield short- and long-term stand-by sensing margins of 482 and 201 mV under a 20 fF bit line load. Electrode texture and interface engineering therefore enable low-voltage, high speed switching without compromising endurance, mitigating the practical Kay–Dunn scaling penalty and the speed–endurance dilemma.

Main resultThe abstract does not state a limitation.

Appeared: Saturday, October 31. Nature Communications. Peer-reviewed journal.

DOI: 10.1038/s41467-026-78705-4