pipette
ESEspañol

Location of maximum bending stress in tapered hollow plants: A case study on Moso bamboo (Phyllostachys edulis)

C. L. Chalermsin, S. Tsugawa, M. Sato

Preprint

In the authors' words

Many slender plants, such as trees and bamboo, have naturally tapered, axially graded forms to withstand wind loads; however, while trees feature solid cross-sections, bamboo culms are hollow. Although tapered hollow stems improve mechanical efficiency, the location at which the maximum bending stress develops remains unclear. As failure in such structures is driven by the bending-induced stress state, identifying this location is essential for understanding their structural capacities. This study aimed to (1) identify the location of the maximum bending stress of a tapered hollow beam made from an axially functionally graded material under various load profiles, (2) verify the consistency between linear and large deflection analyses, (3) investigate the effect of taper ratio on this location, and (4) apply the analysis to Moso bamboo (Phyllostachys edulis) as a case study. Governing nonlinear equations were derived for uniformly distributed load, inverse triangular load, triangular load, and point load; the equations were solved using a large deflection analysis. A linear analysis was also conducted and compared with the nonlinear results. The results showed that the linear analysis is sufficient for predicting the location of the maximum stress under distributed loading; however, under concentrated loading, it is accurate only at low loads. A more tapered geometry shifted the maximum stress toward the tip. In Moso bamboo, the maximum stress is located in the upper region of the culms, providing insights into the natural structural design of tapered hollow plants and a foundation for the design of bio-inspired tapered hollow components.

Main resultLimitation the authors admit

Appeared: Thursday, November 19. bioRxiv. Preprint, not yet peer-reviewed.

DOI: 10.64898/2026.11.16.767008